Bodywork collection

YT5 - 86/87 TORNADO FRONT FENDER (750)

Suzuki GSXR 750 Yoshimura Tornado Front fender
This is the front fender that was used on the GSXR750 version of the Tornado. The 1200 version used a different front fender.

YT3M - 86/87 TORNADO SB TAIL - MODIFIED

Suzuki GSXR 750 Yoshimura superbike tail
This is a modified Yoshimura Tornado tail section. It is a shorter in the back and on the sides and works with the stock steel GSXR 750 fuel tank. If you want to use this seat with the Yosh Tornado tank below you will have to trim the seat pan area back to suit.

The seat pan has been filled in for use with race foam. The tail light is filled in for track use but can easily be cut open.

You will need to make a support bracket underneath the seat pan to support the rider's weight.

YT2 - 86/87 TORNADO LOWER

Suzuki GSXR 750 Yoshimura Tornado Lower
This is the lower belly pan that fits the YT1 Yoshimura Tornado upper fairing.

YT1 - 86/87 TORNADO UPPER

Suzuki GSXR 750 Yoshimura Tornado Upper
This is the Yoshimura Tornado style bodywork for the GSXR 750. Works only with the YT2 lower belly.

Takes a special windscreen and headlight cover and requires bracket fabrication. It does not use the stock GSXR headlight (we've been told CiBie makes a light that fits).

GSXR7YFC - YOSH FRAME COVERS (PAIR) 86-87

Suzuki GSXR 750 Yoshimura frame / carb covers
Check out these cool covers with the Yosh logo on them. Pure unobtanium, until now!

GSXR73 - 86/87 GSXR750/11 LEFT CENTER

Suzuki GSXR 750 Left Mid
This is a direct replacement panel for the GSXR left side mid panel.

GSXR72 - 86/87 GSXR750/11 RIGHT CENTER

Suzuki GSXR 750 Right Mid
This is a direct replacement panel for the right mid side of your GSXR.

GSXR71C - 86/87 GSXR750/1100 RACE UPPER

Suzuki GSXR 750 upper fairing - competition
This is the race version of our GSXR71 upper fairing. The headlight opening has been filled in and the sharp edges around the opening were blended in for a softer more aerodynamic shape. Combine with stock mids or the 3-vent racing mids below. This fairing was designed for the 750 but will fit the 1100 with some minor adjustments.

GSXR71 - 86/87 GSXR750/11 STREET UPPER

Suzuki GSXR 750 Street upper fairing
The turn signal holes have been filled in. This is a direct replacement fairing. Simply drill the mounting holes and mount onto your chassis.

Please note: this fairing mounts to the mid fairings with 2 bolts on each side.

YXR512 - YOSHIMURA XR51 LOWER FAIRING

Yoshimura XR51 Lower fairing
This is the lower belly pan that fits the YXR511 Yoshimura XR51 upper fairing.

YXR511 - YOSHIMURA XR51 UPPER FAIRING

Yoshimura XR51 Upper fairing
This is the Yoshimura XR51 race upper. Works only with the XR5112 lower belly. This upper fairing can also be used by itself for endurance racing.

YT4 - 86/87 TORNADO FUEL TANK

Suzuki GSXR 750 Yoshimura Tornado Race Fuel Tank
The shape of this tank is definitely cool! The top of the tank is slightly lower and the bottom a bit wider than the stock GSXR tank. It also comes with our race aluminum gas cap and a 3/8' NPT bung in the bottom of the tank for a Pingle r

YT3P - 86/87 TORNADO SEAT PAN

Suzuki GSXR 750 Yoshimura Tornado Tail Upholstery pan
This is the fiberglass pan that fits onto the YT3 Tornado seat assembly. Use this pan to upholster for a finished look on your cool Tornado tail section.

YT3 - 86/87 TORNADO SUPERBIKE TAIL

Suzuki GSXR 750 Yoshimura Tornado Tail section
This is a real cool designed tail section for the first generation of GSXR chassis. This will not work with a stock GSXR gas tank, because the front of the seat assembly is rounded to work with the Tornado tank as the stock GSXR tank is straight across the back.
If you were to put this on a chassis with a stock GSXR tank you would have a half moon shaped gap in the front of the seat

MORI1MTLB - GSXR TAILLIGHT BRACKET FOR MORI1M

Suzuki GSXR 750 Moriwaki tail light bracket
This is the taillight bracket to install a '86-87 GSXR750 taillight into the MORI1M tail section. Simply drill the holes in the bracket, screw the taillight to it and install the assembly with epoxy, bondo or silicone caulking.