2ZX7R9 - 93/95 ZX7R RADIATOR GUARD
Kawasaki ZX7R radiator guard
This piece fits in between the lower fairings. Mount it with some silicone and you're good to go…
(Image 1) ZX9R6
ZX9R6 - 94/97 ZX9R RADIATOR GUARD
Kawasaki ZX9R Radiator shroud
This part goes behind the wheel between the two lower fairings.
(Image 1) 2ZX7RWSB1D
2ZX7RWSB1D - 93/95 ZX7R WSB RADIATOR SHROUD
Kawasaki ZX7R World Superbike upper fairing – radiator shroud
This radiator shroud is a cool piece that fits around the fork legs and helps direct air through the radiator instead of bleeding off over the top of it.
This shroud only works with our matching World Superbike upper fairing (2ZX7RWSB1).
(Image 1) 3ZX7RMRS - MUZZY RAPTOR RADIATOR SHROUD
3ZX7RMRS - MUZZY RAPTOR RADIATOR SHROUD
Muzzy Raptor- radiator shroud
This radiator shroud is a cool piece that fits around the fork legs and helps direct air through the radiator instead of bleeding off over the top of it.
(Image 1) ZX7R9
ZX7R9 - 91/92 ZX7R LOWER CENTER RAD GUARD
Kawasaki ZX7R Lower Radiator Guard
This is that little piece that fits between the right and left lowers and mounts behind the front fender. A lot of guys don' t use these pieces anymore, but if you want to we have them available. Their a little tricky to install, we see people zip tie them on and glue them on with clear silicone. But a craft guy can figure it out in a few minutes.
(Image 1) ZX7R8
ZX7R8 - 91/92 ZX7R LEFT RADIATOR GUARD
Kawasaki ZX7R Left radiator guard
This is the inner panel that finished the inside of the fairing off between the front edge of the fairing and the radiator. A lot of guys don' t use these pieces anymore, but if you want to we have them available.
(Image 1) ZX7R7
ZX7R7 - 91/92 ZX7R RIGHT RADIATOR GUARD
Kawasaki ZX7R Right radiator guard
This is the inner panel that finished the inside of the fairing off between the front edge of the fairing and the radiator. A lot of guys don' t use these pieces anymore, but if you want to we have them available.
ZX75 - 89/90 ZX7 LOWER RADIATOR GUARD
Kawasaki ZX7 Radiator guard
This little triangular piece fits between the right and left lower fairing, behind the front wheel.
(Image 1) 6YZF68
6YZF68 - 08/15 YZF600 R6 RADIATOR SHROUD
Yamaha YZF600 R6 Radiator shroud
There were some issues with these bikes running hot on the track so this radiator shroud was designed to go inside the fork opening and direct air to the radiator to prevent air bleed off and overheating.
You don't have to make this piece removable. If you cut a big hole in the center for a pin front stand you can pop rivet the shroud in place. Of course, dzus buttons or well nuts will work as well.
(Image 1) 2YZF66
2YZF66 - 97/01 YZF600RR RADIATOR GUARD
Yamaha YZF600 R radiator shroud
Replacement radiator shroud. Fits stock lowers or our replacement parts 2YZF62 and 2YZF63.
(Image 1) YZF66
YZF66 - 94/99 YZF600 RADIATOR GUARD
Yamaha YZF600 Inner radiator shroud
This is the inner radiator shroud for your YZF600. This piece seals the airflow around the radiator to avoid a high-pressure bleed off the sides, therefore increasing the air force threw the radiator and increasing the cooling efficiency of your radiator assembly. This cool one-piece design fastens to the inside of your fairing assembly. If you're racing your YZF you need to have one of these today!
(Image 1) 2YWCSB7
2YWCSB7 - 94 YOSH UPPER RADIATOR SHROUD
Suzuki GSXR 750 '93 Yoshimura WSBK Upper radiator shroud
This piece can be installed underneath the nose between the forks and increases radiator performance by preventing air bleed off over the top of the radiator. Can be combined with 2YWCSB1 and 3YWCSB
(Image 1) YWCSB7
YWCSB7 - 93 YOSH UPPER RADIATOR SHROUD
Suzuki GSXR 750 '93 Yoshimura WSBK Upper radiator shroud
This piece can be installed underneath the nose between the forks and increases radiator performance by preventing air bleed off over the top of the radiator. Can be combined with YWCSB1, 1V and 1YWCSB1.
(Image 1) 3VFR8
3VFR8 - 94/97 VFR750 RADIATOR GARD
Honda VFR 750 radiator shroud
This is a replacement shroud to fit around the radiator to prevent bleed off and aid cooling.