2ZX7R9 - 93/95 ZX7R RADIATOR GUARD
Kawasaki ZX7R radiator guard
This piece fits in between the lower fairings. Mount it with some silicone and you're good to go…
(Image 1) ZX7R6 - 91/95 ZX7R REAR FENDER
(Image 2) ZX7R6 - 91/95 ZX7R REAR FENDER
(Image 3) ZX7R6
ZX7R6 - 91/95 ZX7R REAR FENDER
Kawasaki ZX7R Rear fender – hugger
This is the direct replacement for the black plastic fender that mounts on to your swing arm. This piece keeps dirt from being thrown on to your shock assembly and the back of your motor. As you can see, we sell this part in fiberglass, bit it is also available in carbon fiber. Call our sales reps for pricing today!
(Image 1) 3ZX7R4 - 96/03 ZX7R SUPERSPORT TAIL
(Image 2) 3ZX7R4 - 96/03 ZX7R SUPERSPORT TAIL
(Image 3) 3ZX7R4 - 96/03 ZX7R SUPERSPORT TAIL
(Image 4) 3ZX7R4
3ZX7R4 - 96/03 ZX7R SUPERSPORT TAIL
Kawasaki ZX7R Supersport seat
This is a one-piece race tail for your Kawasaki ZX7R. We've basically molded the left and right seat sides, solo seat cowl, and tail light area as a one-piece unit. This tail is legal for most race organizations and really cool for custom street bikes. Street guys will cut the tail light hole and silicone in their tail light then mount it on their chassis for that race bike look. This is definitely the coolest tail section for the Kawasaki ZX7R out there. Get yours today!
(Image 1) 2ZX7R4 - 93/95 ZX7R SUPERSPORT TAIL SECTION
(Image 2) 2ZX7R4 - 93/95 ZX7R SUPERSPORT TAIL SECTION
(Image 3) 2ZX7R4 - 93/95 ZX7R SUPERSPORT TAIL SECTION
(Image 4) 2ZX7R4
2ZX7R4 - 93/95 ZX7R SUPERSPORT TAIL SECTION
Kawasaki ZX7R Supersport seat
This is a one-piece tail for your Kawasaki ZX7R. We've basically molded the left and right seat sides, solo seat cowl, and tail light area as a one-piece unit. This tail is legal for most race organizations and really cool for custom street bikes. Street guys will cut the tail light hole and silicone in their tail light then mount it on their chassis for that race bike look. This is definitely the coolest tail section for the Kawasaki ZX7R out there. Get yours today!
(Image 1) YSR503W
YSR503W - YSR50 WORKS RACE TAIL
Yamaha YSR50 Works seat
Our uniquely shaped Works seat assembly features an enlarged number plate area and has a GP look as well.
(Image 1) TZ250H1
(Image 2) TZ250H1 - 80/83 TZ250HJK UPPER/LOWER FAIRING
(Image 3) TZ250H1 - 80/83 TZ250HJK UPPER/LOWER FAIRING
(Image 4) TZ250H1 - 80/83 TZ250HJK UPPER/LOWER FAIRING
(Image 5) TZ250H1 - 80/83 TZ250HJK UPPER/LOWER FAIRING
(Image 6) TZ250H1 - 80/83 TZ250HJK UPPER/LOWER FAIRING
(Image 7) TZ250H1 - 80/83 TZ250HJK UPPER/LOWER FAIRING
TZ250H1 - 80/83 TZ250HJK UPPER/LOWER FAIRING
Yamaha TZ250 Race fairing
This particular setup is actually the fourth incarnation of TZ250 bodywork. It is a sculpted type of fairing of a type that showed up on all sorts of racing machines in the late 70's and early 80's.
The upper and the lower split around the steering head. A sidenote for history buffs: this is one of the first point nosed fairings that was flat sided and full all the way back to the rear tire. The upper features a rounded number plate area and accepts a full bubble windshield.
(Image 1) 2TS91S
2TS91S - 99-04 SPRINT UPPER FAIRING -STREET
Replacement upper fairing. We took the stock three pieces and made them into a one-piece upper. Headlights, driving light and turn signals are cut open for your convenience. Please note there is no tab work on the inside of this upper. The turnsignals and the small driving light can be installed with silicone caulking (you can use epoxy but will be almost impossible to remove later). The headlight is mounted on the metal fairing bracket so no tabs are needed for installation.
TDTZF2 - TD/TZ STYLED FENDER FOR RD FORKS
Yamaha RD350 front fender
Cool, early TZ style front fender narrowed to fit with RD forks. Width at mounting points 4.5'.
(Image 1) OSSA10 - OSSA GP2 FRONT NUMBER PLATE
(Image 2) OSSA10 - OSSA GP2 FRONT NUMBER PLATE
OSSA10 - OSSA GP2 FRONT NUMBER PLATE
Ossa GP3 Phantom number plate - slotted
8GSXR1FT - 03/04 GSXR1000 FUEL TANK
Suzuki GSXR 1000 Fuel Tank
Do you want to knock some weight off of your GSXR? Check out our fiberglass replacement tank! It means a huge weight saving off the top of your bike. The bike will feel lighter and will flick from right to left side effortlessly. The tank uses one of our lightweight racing gas caps on the top, and has a 3/8' bung on the bottom for use with a Pingel fuel valve, available through us.
| Styles Available | Price ($USD) |
|---|---|
| Fiberglass | 1,439.00 |
| Carbon Fiber | 5,756.00 |
(Image 1) YZR5005
YZR5005 - 90 YZR500 RACE TAIL
Yamaha YZR500 tail section
This YZR500 race tail section will fit on the RZ500 as well.
(Image 1) YT5
YT5 - 86/87 TORNADO FRONT FENDER (750)
Suzuki GSXR 750 Yoshimura Tornado Front fender
This is the front fender that was used on the GSXR750 version of the Tornado. The 1200 version used a different front fender.
YT3M - 86/87 TORNADO SB TAIL - MODIFIED
Suzuki GSXR 750 Yoshimura superbike tail
This is a modified Yoshimura Tornado tail section. It is a shorter in the back and on the sides and works with the stock steel GSXR 750 fuel tank. If you want to use this seat with the Yosh Tornado tank below you will have to trim the seat pan area back to suit.
The seat pan has been filled in for use with race foam. The tail light is filled in for track use but can easily be cut open.
You will need to make a support bracket underneath the seat pan to support the rider's weight.
YT2 - 86/87 TORNADO LOWER
Suzuki GSXR 750 Yoshimura Tornado Lower
This is the lower belly pan that fits the YT1 Yoshimura Tornado upper fairing.
YT1 - 86/87 TORNADO UPPER
Suzuki GSXR 750 Yoshimura Tornado Upper
This is the Yoshimura Tornado style bodywork for the GSXR 750. Works only with the YT2 lower belly.
Takes a special windscreen and headlight cover and requires bracket fabrication. It does not use the stock GSXR headlight (we've been told CiBie makes a light that fits).