Products

0RS1253 - 84/85 RS125 TAIL SECTION

Honda RS125 Race Tail
This is the replacement tail section for the 1985 RS125.

10RS2503 - 04/05 RS250 'A' KIT TAIL

Honda RS250 'A' kit race tail
Replacement RS250 race tail that has been built to HRC specs.

Dont forget to order some closed cell foam seat pads along with your tail.

1RS2503 - 84/85 RS250 TAIL SECTION 68

Honda RS250 Race Tail
See our Foam section for the padding.

2AP54 - 02-05 RS50 SUPERSPORT TAIL

2CBR15S - 04/05 CBR1000 SUPERSPORT TAIL

Honda CBR 1000 Supersport tail section
This is the supersport tail section for your Honda CBR 1000 RR. We've taken the right and left seat sides, and the solo seat cowl and molded them into a one-piece race tail. It hides the passenger part of the seat.

Give your street bike a custom race look with this supersport race tail. Get yours today!

2CBR69B - 91/96 CBR600F2/F3 SUPERBIKE TAIL

Honda CBR 600 F2 Superbike race tail
This tail section is similar to the Super sport race tail with the exception of that the seat pan area has been filled in for this race padding. A lot of professional racers like this super bike style seat because they can feel the rear suspension and rear tire better, they also feel that the stock upholstery dampens the effect and that they can get better handling out of there chassis with this style of tail section. This seat works with closed cell race foam, available through us.

2CBR69BS - 91/96 CBR600F2/F3 SUPERBIKE SHORT

Honda CBR 600 F2 Superbike race tail – short version
Like the 2CBR69B but ehm… shorter. This seat has a much lower profile and will make your rear end look smaller. Ladies?

2CBR69S - 91/96 CBR600F2/F3 SUPERSPORT TAIL

Honda CBR 600 F2 Supersport race tail
Here is a real cool piece for your CBR 600 F2. We've taken the right and left seat sides, the tail light area, and the solo seat cowl and molded them into a one-piece race tail. Simply slide your long upholstery inside this fiberglass panel and it hides the passenger part of the seat. Then take the seat assembly and slide that down your chassis, attach the mounts. Give your street bike a custom race look with this super sport race tail. Get yours today!

2CBR69W - 91/96 CBR600F2/F3 WERA RACE TAIL

Honda CBR 600 F2 Supersport race tail
This is the WERA race legal version of the 2CBR69S.

2DUC98 - 91/96 DUC900/750SS RACE TAIL

Ducati 900SS Superbike seat – Superlight
'Superlight' style race seat for your Ducati 900SS. Taillight hole is cut open.Don't forget to order your upholstery as well, shown below!

 

2EX24 - 08 EX250 SUPERSPORT TAIL

Kawasaki EX250 Super sport race tail
This supersport tail has the seat cowl molded in so it's all one piece. All the style lines were retained, nothing was squared off or simplified like some of the other hack jobs you see out there. The taillight is easily cut out for street applications. Contrary to other aftermarket tails you DO NOT have to cut your subframe to mount our tail section.

Best looking EX250 tail section out there, no doubt… Order yours now!

2EX5004 - 94/09 EX500'D' SUPERSPORT TAIL

Kawasaki EX500 Super sport race tail
What you see above is our most popular EX500 piece. This race tail is the right and left seat sides, the tail light area, and the solo seat cowl all molded as a one-piece unit.
Your stock long upholstery slides into this tail section and hides the passenger part of this seat. You then take this assembly and install it onto your chassis and latch the seat locks. To remove this tail section simply pop your “seat latches” and remove the whole assembly off the back of your bike.
This tail is popular in race use and legal in most race organizations around the country. This is also real popular way to get a custom race look for your street bike. The taillight is not cut out but the shape is clearly marked on the tail so you can easily cut it out for street use.
Get yours today!

2FZR111 - 91/96 FZR1000 SUPERSPORT RACE TAIL

Yamaha FZR1000 Supersport tail section
This tail is right and left seat sides, the solo seat cowl, and tail light area all molded into a one-piece unit. This solo seat uses the stock FZR1000 upholstery and covers the passenger provision. Installation is a breeze, drill the mounting holes and mount the seat onto your chassis. The taillight is easily cut open for street use. Get yours today!

2GSX134 - 08 HAYABUSA TAIL SECTION RACE

Suzuki GSX 1300 Hayabusa Race tail – stock length
This is a one piece tail that seamlessly incorporates the seat cowl and turn signals. The taillight and blinkers are easily cut out for street applications. Order yours today!

2GSX134S6 - 08 HAYABUSA TAIL SECTION RACE +6

Suzuki GSX 1300 Hayabusa Race tail +6
Like the +6 street, but with the seat cowl molded in so it's all one piece. All the style lines were retained, nothing was squared off or simplified like some of the other hack jobs you see out there. We've even filled and smoothed the cut out for the left hand passenger peg hanger, ain't that slick huh?

The taillight and blinkers are easily cut out for street applications.

Best looking stretched tail out there, no doubt… Order yours now!