(Image 1) UDP
UDP - UNIVERSAL DRAG BIKE DASH PANEL
Measurements, fitment, and other pictures...
Universal drag bike dash panel
The other day Terry Kizer called Kent to say “You know that dash panel you sent me for my ZX11? Man that thing just came out sooo cool, I mounted my gauges, shift light and switches in it and it was just bitchin’!”
Kent just said “Yeah…”
Terry continued: “Man, people are always coming up to me and saying where did you get that? No one knows that you guys make such a cool dash panel!”
Kent just responded “Yeah”.
Terry said ” The thing was just beautiful until it got smashed up in the last crash can I get another?’ And Kent just said “Yeah”.
The moral to this story…… Just get one of these cool, bitchin’, beautiful dash panels.
Dimensions:
24″ x 24″
Half moon shape 18″W x 7.25″L x 2.25″D
Manufacturing Notes:
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
FAQ's and Reviews
Once again we make every part to order and most often needs custom installation on your part.
Our custom made bodywork is... CUSTOM MADE! So we can make it however you want it.
If you're a previous Airtech customer, our parts are made slightly thicker, 30% heavier with DOUBLE the strength.
If you don't want it thicker, please request "RACE-THIN" in the custom request.
We can also pre-prime or pre-paint your parts for additional charges.
Here's a quick video on how our parts are different, and WHY it's worth it for you.
You might also be looking for...
DBAB - DRAGBIKE AIR BOX
Universal drag bike air box
We offer a semi-universal air box for pro stock styled motorcycles. This three piece design is the brainchild of Kent Riches. It is very simple and extremely Effective. This assembly has a valve cover plate that attaches to the front belli pan ramp and extends back to the carburetor plate. The carb plate extends down the back of the cylinder then over the top of the transmission and then turns back upward to the seat pan and the third piece sticks under the seat pan to seal off the back. You simply trim the air box to seal to the side of your fairing and the body acts as the box top. We use a real trick edge trim material that has a sponge rubber bulb on it to seal off to all of the other body panels (part# ABSB below).
Kent designed a very simple and effective airbox that is guaranteed to give you 5-7 % more horsepower. Give us a call today
(Image 1) DBHLR - DRAGBIKE HEADLIGHT ROUND
DBHLR - DRAGBIKE HEADLIGHT ROUND
Universal drag bike headlight
Headlights, we have stinkin’ headlights! A rear bucket has generous lip to bond or screw the front cover onto. Hide your wiring inside or mount switches, lights or whatever you need to clean up the front of your bike. This light came off a Kawi, but if you put it on a Zook, we won’t tell anyone.
(Image 1) TDFF - ICS INVERTED FRT FENDER ASYMMETRIC
TDFF - ICS INVERTED FRT FENDER ASYMMETRIC
ICS drag bike front fender
A universal front fender to fit the ICS inverted front drag forks with an 18′ drag tire! Yep, what more can we say? How about we were the original designers, and that there’s a low, life maggot fetus copying our design! Well that is about all!
There are two versions:
TDFF asymmetric, right leg is shorter so you can get to the axle nut.
TDFF2 symmetric, both ears are same length.
(Image 1) TDFF2 - TRAC DYNAMICS FRT FENDER SYMMETRIC
TDFF2 - TRAC DYNAMICS FRT FENDER SYMMETRIC
There are two versions:
TDFF asymmetric, right leg is shorter so you can get to the axle nut.
TDFF2 symmetric, both ears are same length.
ICS drag bike front fender
A universal front fender to fit the ICS inverted front drag forks with an 18′ drag tire! Yep, what more can we say? How about we were the original designers, and that there’s a low, life maggot fetus copying our design! Well that is about all!
UFBF - UNIVERSAL FUNNY BIKE FAIRING
This funny bike / top fuel fairing is a versatile piece. It’s got some cool style lines in it and will fit just about anything with some simple brackets.
Measurements:
Length along face 20.5″
Width at bottom 9.5″
Width at top 6″
(Image 1) URBP - UNIVERSAL DRAG BIKE REAR BELLY PAN
URBP - UNIVERSAL DRAG BIKE REAR BELLY PAN
Universal drag bike belly pan
Well what is it? What does it do? Is it upside down? Yep! Well it is kind of hard to visualize but imagine this thing flipped over and under your motorcycle just in frront of your rear tire. You see as air gets under your bike it packs under there and it feels like your pivoting on a rock. With this belli pan the air is allowed to get sucked into the rear of the body and creates a low pressure point under the bike that wants to then suck it to the track. The pro’s are using it, but you wouldn’t know it unless they ran you over! Get stable, get sucked to the track, get yours today!
(Image 1) WBC1 - WHEELIE BAR COVER "KOSMAN"
WBC1 - WHEELIE BAR COVER "KOSMAN"
WBC1 Kosman
WBC2 Universal
Drag bike wheelie bar covers
Wheelie bar panels? Yep! The things you stick your sponsors stickers to? Can I order some today? Yep!!
WBC1 Kosman wheelie bar cover shown on left
WBC2 Universal wheelie bar cover comes in a big sheet as a cut to fit application. It’s got a rolled lip on both long sides to fit over the top of the wheelie bar. Most guys can get 2 covers out of one piece. Dimensions are 72″x19″
Please note: wheelie bar covers can only be shipped with a drag bike body, or picked up.
(Image 1) WBC2 - UNIV. WHEELIE BAR COVER
WBC2 - UNIV. WHEELIE BAR COVER
WBC2 Universal
Drag bike wheelie bar covers
Wheelie bar panels? Yep! The things you stick your sponsors stickers to? Can I order some today? Yep!!
WBC1 Kosman wheelie bar cover shown on left
WBC2 Universal wheelie bar cover comes in a big sheet as a cut to fit application. It’s got a rolled lip on both long sides to fit over the top of the wheelie bar. Most guys can get 2 covers out of one piece. Dimensions are 72″x19″