(Image 1) GSX137
GSX137 - 99/06 GSX1300 LOWER REAR WING
Measurements, fitment, and other pictures...
Suzuki GSX 1300 Hayabusa Lower wing
This is the little lower wing area that fits below the exhaust pipe, in front of the rear wheel. This helps rout the air around the rear tire at high speeds. This is a direct replacement for the original piece.
Manufacturing Notes:
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
FAQ's and Reviews
Once again we make every part to order and most often needs custom installation on your part.
Our custom made bodywork is... CUSTOM MADE! So we can make it however you want it.
If you're a previous Airtech customer, our parts are made slightly thicker, 30% heavier with DOUBLE the strength.
If you don't want it thicker, please request "RACE-THIN" in the custom request.
We can also pre-prime or pre-paint your parts for additional charges.
Here's a quick video on how our parts are different, and WHY it's worth it for you.
You might also be looking for...
(Image 1) GSX1310
GSX1310 - 99/05 GSX1300 U/SEAT ENCLOSURE
Suzuki GSX 1300 Hayabusa Under seat enclosure
This is a really cool under seat enclosure for the Hayabusa. What it does is eliminates all of that black plastic crap that sticks out the bottom of your tail section. Our under seat enclosure relocates the tail light inboard and then you flip the tail light upside down so that the reflector is hidden inside. It is pretty cool one-piece design. It' s different, it' s cool you need to get one today. This is sold in fiberglass, but also available in carbon fiber.
(Image 1) GSX1311
GSX1311 - 99/05 GSX1300 FUEL TANK
Suzuki GSX 1300 Hayabusa Fuel tank
Do you want to knock some weight off of your Busa? This is the first place to start! It is a considerably huge weight saving off the top off your bike. You will find an immediate handling difference by installing our lightweight fuel tank. The bike will feel lighter and will flick from right to left side effortlessly. The upper and lower of this gas tank are identical to the stock shape and mounts onto the chassis with all of your stock hardware. Uses one of our lightweight racing gas caps on the top.
1999-2000 Hayabusas had a fuel pump attached to the throttle bodies. Later models had a fuel pump inside the tank.
Please specify if you want the tank set up for an internal or external fuel pump. Extra nitrous bungs are available also. Call one of our sales reps for details.
GSX1311SI - 99/05 GSX1300 FUEL TANK SLAMMED IN
Suzuki GSX 1300 Hayabusa Slammed fuel tank
You've been at the racetrack and seen all of these race bikes with smaller Busa gas tanks. That' s right, it' s ours! We designed this smaller fuel tank for the Busa that is two inches narrower and three inches lower than a stock tank. There' s no secret that the Busa gas tank is a monster and difficult for a small rider to get around. This gas tank solves that problem. This tank is available with one of our lightweight racing gas caps, use your stock mounting hardware at the rear of the tank and this tank comes with an aluminum ring to use with an internal fuel pump. Extra nitrous bungs are available.
GSX1311SO - 99/05 GSX1300 FUEL TANK SLAMMED OU
Suzuki GSX 1300 Hayabusa Slammed fuel tank
This gas tank is similar to our other slammed tank with the exception that it is for an external fuel pump. This gas tank comes with two 3/8' s bungs in the bottom of it. It is also available with additional nitrous bungs. Please talk to our sales reps for details.
(Image 1) GSX1312
GSX1312 - 99/05 GSX1300 DASH PANELS PAIR
Suzuki GSX 1300 Hayabusa Dash Panels
What we have here is the right and left dash panels for your Busa. We've taken the front and rear dash panels and molded them together as a one-piece unit to eliminate that seam on the side. Sold in light weight fiberglass, a lot of the people paint these to match the fairings, looks really good!
(Image 1) GSX1313
GSX1313 - 99/05 GSX1300 DRAG BIKE SEAT PAN
Suzuki GSX 1300 Hayabusa Seat pan
This is our drag race seat pan area for the Hayabusa's. Simply take off your tall rider seat, remove the brackets from underneath, and attach the brackets onto our fiberglass seat pan.
What this dual step seat pan does is it lowers the rider and locks him into a lower seating position for the hard launches of the Busa, and then in third gear the rider slides up to the taller second step of the seat pan, which allows the rider to flatten his back out for better aerodynamics and higher top end speeds. Just like we've been doing on all the pro stock drag race bikes and land speed bikes for years.
This is a very cool seat pan and works great on your Busa. Air-Tech' s owner, Kent Riches, recently saw a competitors seat pan at the Pro Star National in Gainesville, Florida. Kent commented on the competitor' s piece saying “it looked like it was designed by a kindergartener with two by fours”; the corners of the dual step were real sharp. We know from experience that those sharp corners dig into your legs and bruise the back of your inner thighs on those hard 3rd and 4th gear changes.
If you look at our seat pan area you' ll notice that those areas are rounded and smooth and makes for a very nicely designed, cool looking seat pan. Basically, ours looks cool and theirs looks stupid. If you want to be ultra cool, buy ours in carbon fiber. Call our sales reps today!
(Image 1) GSX131C
GSX131C - 99/05 GSX1300 COMPETITION UPPER
Suzuki GSX 1300 Hayabusa Competition upper fairing
This is identical in exterior shape to the Hayabusa upper fairing with the exception that the headlight holes and turn signal holes have been filled in for race purposes. This is a very popular muscle fairing on a lot of drag bikes and land speed bikes. Get yours today!
(Image 1) GSX131CT
GSX131CT - 99/05 GSX1300 COMPETIT.UPPER TURBO
Suzuki GSX 1300 Hayabusa Turbo upper fairing
This is a competition upper fairing used on a lot of the turbo charged drag race bikes like Barry Henson' s championship winning shoot out bike. This is identical in exterior shape to the Hayabusa upper fairing with the exception that the headlight holes and turn signal holes and air intake ducts have been filled in. It also mounts onto your stock and brackets uses your existing windscreen and mounts to your stock lowers. This is a real cool aerodynamic upper fairing for t
(Image 1) GSX131S
GSX131S - 99/05 GSX1300 STREET UPPER
Suzuki GSX 1300 Hayabusa Street upper fairing
Do you need an affordable way to replace your expensive crashed damaged upper fairing? We've got what you need!
Our lightweight fiberglass piece is identical in exterior shape and design to your stock Hayabusa upper fairing with the exception that we do not do the tabs on the inside to mount the headlights. But it's no big deal because their not necessary to mount the headlights into our fairing.
Just call our sales reps and they' ll tell you how we install them on the bikes. A crafty guy can mount this on his bike in a couple hours and save himself hundreds of dollars over the stock Suzuki piece. Save yourself some money and get yours today!
(Image 1) GSX132
GSX132 - 99/05 GSX1300 RIGHT LOWER
Suzuki GSX 1300 Hayabusa Right lower fairing
This is a lightweight, affordable, crash replacement part for you Hayabusa.