(Image 1) 2CBR62HRC
2CBR62HRC - 91/94 CBR600F2 CAMEL RIGHT LOWER
Measurements, fitment, and other pictures...
Honda CBR 600 F2 Right lower fairing
This is the HRC version of the Honda CBR 600 F2 lower fairing.
Manufacturing Notes:
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
FAQ's and Reviews
Once again we make every part to order and most often needs custom installation on your part.
Our custom made bodywork is... CUSTOM MADE! So we can make it however you want it.
If you're a previous Airtech customer, our parts are made slightly thicker, 30% heavier with DOUBLE the strength.
If you don't want it thicker, please request "RACE-THIN" in the custom request.
We can also pre-prime or pre-paint your parts for additional charges.
Here's a quick video on how our parts are different, and WHY it's worth it for you.
You might also be looking for...
(Image 1) 2CBR63HRC
2CBR63HRC - 91/94 CBR600F2 CAMEL LEFT LOWER
Honda CBR 600 F2 Left lower fairing
This is the HRC version of the Honda CBR 600 F2 lower fairing.
(Image 1) CREA61K
CREA61K - 92/98 CBR600 F2/F3 CREA KIT
Crea body kit
This is a complete body conversion kit for the '91-'94 CBR 600 F2 and the '95-'98 CBR 600 F3. The kit contains main upper fairing, the lower belly pan, the front fender, tail section, and a removable solo seat cowl. This body kit bolts up to your CBR 600 using all your stock Honda brackets and hardware.
Please note that the Honda front main bracket bends like butter so we strongly recommend replacing your bracket with a new Honda piece.
This fairing assembly uses a '95-'98 CBR 600 F3 windscreen (not supplied).
This body kit will bolt onto all CBR 600s from '91-'98.
The '97-'98 CBR 600 F3 owners will have to replace their taillight with a '91-'96 CBR 600 taillight assembly.
This kit requires an average skill level to install. By average we mean that if you can change your rear tire you should have no problem installing this onto your motorcycle. Some drilling, trimming, and fitting is required to mount this assembly. As you can see, the results are well worth it!
(Image 1) 4CBR6SJR
4CBR6SJR - 95/96 CBR600F3 SMOKIN JOES KIT
Smokin' Joe body kit
The Smokin' Joe two piece fairing assembly consists of a street legal main upper with a single round headlight hole for that European endurance look. The lower fairing is the same as most pros use, complete with oil containment pan as most race organizations require. The supersport tail uses the stock upholstery and the kit is completed by a front fender.
This is an awesome kit for a custom street bike, or just an old tired Honda CBR 600 with busted fairings. If you are taking your Honda CBR 600 to the track, this is also the best deal on a full set of skins. The headlight hole can be filled in for an additional fee.
Get yours today!
(Image 1) 2CBR610
2CBR610 - 91/94 CBR600F2 NUMBER PLATE
Honda CBR 600 F2 Number plate
This neat little piece replaces the headlight in the front fairing for a race or a track day. Simply glue, or silicone, the inside of your part to the inside of your upper fairing to fill in the headlight area in order to apply numbers to the front. You can also use this piece for a custom headlight installation in the front of your Honda CBR 600 F2.
(Image 1) 2CBR613
2CBR613 - 91/98 CBR600F2/F3 FUEL TANK
Honda CBR 600 F2 Fuel tank
Check out our lightweight racing gas tank! This fiberglass tank is considerably lighter than the stock tank. It shaves some weight off of the top and will make your bike easier to flick from side to side, so it's a primo way to improve the handling on your Honda CBR 600 F2.
(Image 1) 2CBR614
2CBR614 - 91/95 CBR600F2 REAR FENDER
Honda CBR 600 F2 Rear swing arm fender
Replace your crash damaged or missing rear swing arm fender with our lightweight fiberglass piece. Simply drill the mounting holes and attach it onto the Honda CBR 600 F2 chassis.
(Image 1) 2CBR66M
2CBR66M - 91/94 CBR600F2 MOD FRONT FENDER
Honda CBR 600 F2 Modified front fender
Replace you busted front fender with our lightweight fiberglass piece. This is the modified fender, that is clearanced for expanding front tires on race bikes. Simply drill the mounting holes, paint, and attach it onto your CBR 600 F2.
(Image 1) 2CBR66
2CBR66 - 91/94 CBR600F2 FRONT FENDER
Honda CBR 600 F2 Front fender
Replace you busted front fender with our lightweight fiberglass piece. Simply drill the mounting holes, paint, and attach it onto your CBR 600 F2.
(Image 1) 2CBR615
2CBR615 - 91/96 CBR600F2/F3 U/SEAT ENCLOSURE
Honda CBR 600 F2 Undertail
Very cool under tail that cleans off the underneath of your tail section. Simply hack out all of that stock black, plastic crap that sticks below your body panels and mount our lightweight fiberglass piece underneath there. Custom paint or color-match the rest of your bodywork for a cool street look. One thing that you may notice is that our under tail has a license plate bracket already molded into it so there are no ugly brackets needed to mount your license plate on it. This is a cool piece! Get yours today!
(Image 1) 2CBR69BS
2CBR69BS - 91/96 CBR600F2/F3 SUPERBIKE SHORT
Honda CBR 600 F2 Superbike race tail – short version
Like the 2CBR69B but ehm… shorter. This seat has a much lower profile and will make your rear end look smaller. Ladies?